Project Name : Monitoring tool wear and cut SW

End User: Korea Institute of Production Technology

사용장비: LabVIEW, NI-9215, NI-9222, NI-9232, NI-9401

내용: Data is collected using vibration, current, and force sensors to count when the value is set by the user for each area, and output the status when the number of counts reaches the value set by the user.Replace the tool with a new tool using NI-9401 if the output data reaches an abnormal area such as damage, collision, etc. and exceeds the set count.Save RAW DATA and a total of 10 attribute values as CSV files. Predict tool wear and surface roughness values in real time by calculating each characteristic value.

Project Name: Aircraft Simulator

End User: Boomer CE

Equipment used: cRIO-9045 with LabVIEW RT

Content: Simulator equipment that provides and verifies signals on behalf of the actual aircraft. By simulating heavy equipment called aircraft, it is possible to check interaction with peripheral devices and perform simulation of moving equipment

Project Name: Shape Vision Inspector

End User: Seongil Tube

사용장비: LabVIEW, Vision Assistant, Basler acA2440-20gm, Edmund 25 mm C series Lens

내용: It is a program that takes a vision of the shape of a sample and inspects 12 dimensional inspection items desired by the user to determine the combination. The test results can be comprehensively checked, and history search and result trends can be checked through the data viewer program.

Project Name: Special Waves Program

End User: Zetec

사용장비: LabVIEW, USB-6356 (BNC)

내용: A function generator with a variety of options, including functions of an existing function generator, as well as amplitude or frequency - gradual variation, random within range, cycle or time-sequential output - progress, and whether offset is used as a medium or minimum.

Project Name: SNT HSG resolver plate assembly & offset angle inspection, resistance & withstand voltage inspection

End User: SNT MOTIV

사용장비: LabVIEW, Atlas Copco, RM3545, TOS-5200

내용: Use OK, NG MASTER products before production to determine whether the output value is normal, and if the output value falls within the specified range after each process starts, it is judged as acceptable, otherwise, it is rejected, and stored in the database.

Project Name: Model Test

End User: Korea Institute of Production Technology (Daegu)

사용장비: LabVIEW, Impact Hammer, cDAQ 9171, NI 9263

내용: Measure the vibration value for each position value of the sensor set by the user and determine whether there is a defect through the calculation formula. Measure the pick value, IRCSA, RCSA, etc., and retrieve the data values of the current experiment.

Project Name: Motion Control System

End User: CAMTIC Institute of Technology

사용장비: cRIO-9039

내용: Development of rehabilitation treatment devices through motion control through MODBUS and detection of human body movement through sensors.

Project Name: Data Collection Program

End User: Institute of Production Technology.

사용장비: LabVIEW, cDAQ-9178, NI-9234,NI-9201, cRIO-9423

내용: Graph and store collected physical data and load as many stored data as desired to compare with previous data

Project Name: Humidity Monitoring System

End User: Busan National University Earthquake Prevention Research Center

사용장비: LabVIEW,PXIe Chassis, PXIe odules

내용: It is a program that monitors humidity through a multi-channel humidity sensor connected to the PXI module, logs data, and makes a strong warning sound when it is higher than the set humidity value. Humidity is determined by calculating the differences between channels, so even channels must be used.

Project Name: Pattern Processing System

End User: Zetec

사용장비 : LabVIEW, USB-DAQ

내용 : A system that prints arbitrary patterns to process patterns on film

Project Name: Weather Logger System

End User: Shinmyung Electronics (Nuclear Environment Corporation)

사용장비 : cRIO-9030 2EA, cRIO-9063 3EA

내용 : Digitalize the signals of wind direction, wind speed, and temperature sensors from three cRIO-9063s and transmit data to two cRIO-9030s every second through serial communication. cRIO-9030 stores and delivers average data every minute. Synchronize by sharing the data if the storage data for each cRIO-9030 is different.

Project Name : 2D Image 3D Visual

End User : UNIST

사용장비 : LabVIEW, THORLABS DCC3260C

내용 : Real-time representation of brightness information in 3D based on images acquired from cameras. Acquire and set up camera images based on Dot NET.

Project Name: Speech Recognition

End User : UNIST

사용장비 : LabVIEW, : cDAQ-9171, NI 9234, Industrial microphone

내용 : Record the words you want in advance, save them, and compare them to the files you recorded in advance when you talk about the same words later. For each acoustic information, analyze the frequency to calculate the probability of matching the same person.