Project Name: Noise Measurement System

End User: Hyundai Construction Machinery

사용장비: cDAQ-9174, NI9234, LabVIEW

내용: A program that can measure noise dB and log data using a microphone. The 6-channel graph can be checked individually, the sensitivity of the microphone sensor can be automatically retrieved through the calibrator, and the noise average dB and the average dB of the entire logging data can be checked.

Project Name: CSS SERVOPRESS

End User: SNT MOTIV

사용장비: Robostar, ServoPress

내용: Drive the cylinder and equipment within the specification set by the user and determine if the product is defective by looking at the values of LVDT, PRESSURE, VACUUM, TORQUE, FLOW.

Project Name: Aircraft Simulator

End User: Boomer CE

Equipment used: cRIO-9045 with LabVIEW RT

Content: Simulator equipment that provides and verifies signals on behalf of the actual aircraft. By simulating heavy equipment called aircraft, it is possible to check interaction with peripheral devices and perform simulation of moving equipment

Project Name: Shape Vision Inspector

End User: Seongil Tube

사용장비: LabVIEW, Vision Assistant, Basler acA2440-20gm, Edmund 25 mm C series Lens

내용: It is a program that takes a vision of the shape of a sample and inspects 12 dimensional inspection items desired by the user to determine the combination. The test results can be comprehensively checked, and history search and result trends can be checked through the data viewer program.

Project Name: CSS AIRFUNCTION

End User: SNT MOTIV

사용장비: LabVIEW, cDAQ 9185

내용: Drive the cylinder and equipment within the specification set by the user and determine if the product is defective by looking at the values of LVDT, PRESSURE, VACUUM, TORQUE, FLOW.

Project Name: Improvement of Axial Force Moment Load Cell Measurement

End User: Pusan National University

사용장비: HBMK-CMS10 6CH Load cell, SCXI-1600, SCXI-1121, SCXI-1120D

내용: It is a program that collects and logs 6-axis load cell sensor data and temperature/humidity/atmospheric pressure/wind tunnel pressure data, and outputs processed data through data-to-data calculations. Graph data can be easily checked by dividing it into three groups, and data logging can also be continued and instantiated.

Project Name: Water Level Sensor Frequency Measurement Device

End User: LG Electronics

사용장비: LabVIEW, cDAQ-9178, NI 9411, NI 9478, NI 9435

내용: It is an equipment that analyzes frequency data of a washing machine water level sensor according to a change in water level and determines the sum of the products. The water level is precisely controlled through servomotor control. Regular Top Loader

Project Name: Special Waves Program

End User: Zetec

사용장비: LabVIEW, USB-6356 (BNC)

내용: A function generator with a variety of options, including functions of an existing function generator, as well as amplitude or frequency - gradual variation, random within range, cycle or time-sequential output - progress, and whether offset is used as a medium or minimum.

Project Name: SNT HSG resolver plate assembly & offset angle inspection, resistance & withstand voltage inspection

End User: SNT MOTIV

사용장비: LabVIEW, Atlas Copco, RM3545, TOS-5200

내용: Use OK, NG MASTER products before production to determine whether the output value is normal, and if the output value falls within the specified range after each process starts, it is judged as acceptable, otherwise, it is rejected, and stored in the database.

Project Name: Vision system for post-knit processing inspection.

End User: Korea Shoe Leather Research Institute

사용장비: cDAQ-9171, cDAQ-9178, NI 9401, NI 9435

내용: Fix the outer skin of the shoe, which is a knit material, to the actuator and automatically increase the product, and in that state, a person irons and checks the post-processing status with a video.

Project Name: Model Test

End User: Korea Institute of Production Technology (Daegu)

사용장비: LabVIEW, Impact Hammer, cDAQ 9171, NI 9263

내용: Measure the vibration value for each position value of the sensor set by the user and determine whether there is a defect through the calculation formula. Measure the pick value, IRCSA, RCSA, etc., and retrieve the data values of the current experiment.

Project Name: Motion Control System

End User: CAMTIC Institute of Technology

사용장비: cRIO-9039

내용: Development of rehabilitation treatment devices through motion control through MODBUS and detection of human body movement through sensors.

Project Name: JST HSG GATHERING

End User: SNT MOTIV

사용장비: LabVIEW, Atlascopco, SCMI magnet, ROBOSTAR

내용: It improves process efficiency and product quality reliability by registering the product's pass or fail and the result value data from each process with the registered data at the start of each process.

Project Name: Trigger-based sensor attribute logging system

End User: Hallym University

사용장비: LabVIEW

내용: A system that receives a trigger signal, inspects the characteristics of a sensor, logs data, and stores sensor characteristics. Programming consulting and production remotely based on the Internet.

Project Name: Particle Checker

End User: Dongjin Semichem

사용장비: LabVIEW, Vision Development Module

내용: Save the photos taken under a microscope by folder and search for particles (foreign materials) through image processing. Particles are classified by size and determined positively/disregardably based on the user-specified reference value.

Project Name: IR Temperature Sensor Measuring System

End User: Shinsung Delta Tech

사용장비: LabVIEW, UART Serial

내용: It is a program that communicates with equipment that tests IR temperature sensor module to show the results of the payment on the screen and stores the results of the measurement. Store the daily production volume and the results of the judgment, and sound the alarm when the IR temperature sensor module is defective.

Project Name: OSEV LINE GATHERING

End User: SNT MOTIV

사용장비: LabVIEW, Atlascopco, Perforator, Tighten Bolting

내용: It improves the efficiency of the process and reliability of the product quality by registering the result data from each process with the MES server and determining whether the product is accepted or not.

Project Name: Fluorescence Detection 2D Inspector

End User: Korea Shoes Leather Institute

사용장비: LabVIEW, USB-6525, BalseracA2000-50gc

내용: Glue containing fluorescent material is sprayed on the middle window of the shoe, and vision inspection is done to ensure that the sprayed glue is in the desired position. The backlight is used to identify the location of the product, detect fluorescent substances with black light, and examine them.

Project Name: Ship Engine ME-LGIP Hills

End User: MAN Energy Solutions

사용장비:  PXI 2ea, MANMPC

내용: Simulate Dual Fuel ship engines to connect signals to engine ECU to enable fault diagnosis and engine simulation

Project Name: Inertial sensor - Racelogic

End User: Pusan National University

사용장비: LabVIEW

내용: Create CAN DB of CAN data from inertial sensors, save each separation display of X-axis_Acceleration, Y-axis_Acceleration, Z-axis, Pitch, Roll, Yaw, Temperature.